Payment & Shipping Terms:
Workshop Cree Led High Bay Lamp 200 Watt With 400W HPS
UL LED High Bay Lighting series can be widely used in outdoor, indoor or outdoor lighting(Wet location), like mechanical or electronic processing workshops, storage warehouses, steel mills, gas stations, toll booth, waiting rooms, the platforms of railway station , indoor stadiums and flower cultivating tents etc.
|Input Voltage||AC200-480V||LED Brightness Decay||<5%/6000 hrs|
|PF||>0.95||Working Life||>50000 hrs|
|Driver Efficiency||>90%||Working Temperature||-30 - +40℃|
|Luminous Flux||28500 Lm||Storage Temperature||-40 -+80℃|
|Color Temperature||3000K/4000k/5000K/6500k||Protection Level||Wet Location/IP65|
1, BASED ON CREES SC3 TECHNOLOGY PLANFORM
Using XMLB LED of CREE Inc,Based on Cree’s SC3 technology platform,High efficiency and high reliability.
2, TESTING BY X-RAY
LED soft soldering testing by X-RAY for cold solder joint and soldering related non-conforming.
Heat conductivity coefficient of copper substrate is 383.8W/m.K,but the traditional aluminum substrate is about 2.0-3.0W/m.K.
4,USING DLC TECHNOLOGY FOR MPCB
Using DLC technology for MPCB module,heat conduction rate at 200W/m.K,lower junction temperature.
5,USING METAL POWDER ADHESIVE
Using high conduction adhesives 30W/m.K,not the heat conductive silicone grease,it’s metal powder adhesive.
6,USING HEAT PIPE AND COOLING FINS FOR 1070 ALUMINUM ALLOY
Using heat pipe and cooling fins for 1070 aluminum alloy,fast conduction.
7,24 HOURS HIGH TEMPERATURE TESTING
High temperature testing room at 106℉,24 hours aging after aging.
30 minutes switch aging(10 seconds per cycle)