Replace 1000w metal halide led light fixtures for parking lots , 38000lm
Perfect for parking lots, roadways, car dealerships, campuses and parks—this 300-watt LED
Shoebox/streetArea Light shines brightly when reliability and performance are critical.
The high-power LED light is also a great replacement option for street lights and vapor lamps. Features
SMD LEDs with an output of 38000 lumens. Natural white LEDs have a 5000K color temperature
and emit a TYPE 3 beam angle.
This powerful, energy-efficient LED area light uses just 300 watts of power—comparable to 1000watt
metal-halide (MH) fixture. And with a life expectancy of 50,000 hours—3 times as long as MH fixtures
—the LED light reduces costly repairs and the need for replacements. The weatherproof, IP65-rated die
cast aluminum housing guards against damage done by harsh or wet weather conditions, and a
removable cover allows for easy access to the driver and mounting arm hardware. This LED area light is
designed to slip-fit onto a round pole.
Different installation fixtures: arms, slip fitter, Trunnion
Specifications of 300w led area/street lights
|Replace Metal Halide
||1000W Metal Halide
||Type 3, Type5, Type2
|Power Supplier Solution
||UL listed LED Driver
||UL DLC approved
1, BASED ON 3030 TECHNOLOGY PLANFORM
High efficiency and high reliability.
Heat conductivity coefficient of copper substrate is 383.8W/m.K
3,USING DLC TECHNOLOGY FOR MPCB
Using DLC technology for module,heat conduction rate at 200W/m.K,lower junction temperature.
4,USING METAL POWDER ADHESIVE
Using high conduction adhesives 30W/m.K,not the heat conductive silicone grease,it’s metal powder
5,24 HOURS HIGH TEMPERATURE TESTING
High temperature testing room at 106℉,24 hours aging after aging.
30 minutes switch aging(10 seconds per cycle)